Environmental Diatom Mud Paint Interior Wall Stucco decorative plaster stucco

Diatom Mud——respirable environment friendly wall materials

Natural & Environmental Protection    Purify Air       Breathing & Adjust Humidity

Fire Prevention & Inflaming Retarding    Sound-absorbing & Reduce the Noise

Heat Preservation & Heat Insulation     Soft Color    Personality Decorative

Diatomite is the natural substances by the aquatic plankton—diatoms living a few hundred yeas ago. The main component is opal, it is rich in variety of useful minerals and the texture is light and soft. Under the electron microscope it is found that there are numerous tiny holes on the surface, the porosity is more than 90% and the surface area is 65/g. It is the outstanding crystal structure that determines its unique features—It has extremely strong physical adsorption performance and ion exchange performance.

Product Features

1. Effective sterilization and inhibit bacteria: It has the effect to sterilize and inhibit the bacteria.
2. purify the air and dissolve harmful substances, remove peculiar smell: It can purify formaldehyde, ammonia, benzene, etc. harmful substances in interior air. It can significantly reduce the peculiar smell of smoking, pet’s body odor and life rubbish.
3. Respirable and control humidity: It can release or absorb the moisture in the air so that it can automatically adjust the indoor air humidity.
4. Heat preservation and heat insulation: The thermal conductivity of diatomite is low and the thermal insulation property is excellent.
5. Sound insulation and reduction of noise: It has good function of sound insulation so that it can create a comfortable quiet living space.
6. Fireproofing and inflaming retarding: diatomite ooze wall materials can resist high temperature, not burn, and will not produce any toxic gas when it is on fire.

Scope of application

This product's scope of application is very extensive. It can be used in family(the inner wall and roof of houses, such as bedrooms, living rooms, restaurants, studies),apartment, kindergartens and nursing homes, hospitals, clubs, upscale hotels, resort hotels, office buildings, restaurants, etc.

Construction process

1. Mixing method

1.1 Prepare the same quantity water and diatom ooze powder.

1.2 First pour 90% water in a big container, and then pour diatom ooze powder into it.

1.3 Mix it fully with mini-type high-speed blender.

1.4 Adjust it with the remaining 10% water when mixing.

2. Daub: daub twice, the total thickness is between 1.5 ~ 3.0 mm.

Under coating construction: daub diatom mud first time: first pass daub evenly and smooth after a few minutes(the surface is not sticky).

Upper coating construction: daub diatom mud for the second time: keep the uniform and smooth.

3. Texture pattern's making: according to the actual dry environment , master the drying time, according to construction method to make texture pattern.

4. Collect light: after making the texture pattern, collect light and compaction follow the design pattern with collect light trowel.

5. The finished product protection: usually need 48 h to dry completely, don't touch it within 48 h; After 48 h can use a watering can to spray a small amount of water, and  removal of surface material with a clean or dry towel or sponge foam after dry.

Attention

1. Make sure that the ground materials are dry and clean before construction.
2. If there is oil spot on the ground materials
3. Crackles might appear by reason of construction., please handle this in advance.

Storage Period

Avoid direct sunlight, should be kept on the plate from the ground.

12 months stored in the cold and dry place.

Spec.

20kg/barrel/bag   

FOR OEM:

1. Brand Owner’s Authorization Letter is required to be issued & provided for the corresponding production and exportation;

2. Quality only based on the samples which the buyer provided or YUNYAN’s counter-sample confirmed by buyer.

In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

3. OEM MOQ: at least 1*20 feet container per item/color.

4. Printery mold fee: USD250 for 3000 bags at least.

   Package cost: USD0.40/bag

   Printing lead time: 12-15days